|
Qmark® Wall Heaters - Type GFR


We are an authorized distributor for Qmark®


-
Ideal for bedrooms, dens, basements, converted
attics, breezeways, garages, bathrooms, small offices, workshops, and other
similar areas. Also adaptable to multiple installations in somewhat larger or
odd shaped rooms.
-
Multi-wattage capability (see selection
chart). With three models providing a wattage range from 375 watts (1280 Btu/hr)
to 2400 watts (8190 Btu/hr), the GFR is a very versatile heater with a wattage
output to satisfy a wide range of application.
-
The tangential blower and the impedance
protected, permanently lubricated motor are trouble-free and very quiet.
-
Each unit comes equipped with an automatic
over temperature protector that guards against overheating. Also standard is a
pilot light that indicates the protector has operated.
-
The heating element features heavy gauge
steel fins which are brazed to low watt density steel sheathed tubular elements in a
uniform grid pattern.
-
Two mounting brackets are provided with each
unit to aid in installation into new construction. When utilized, they correctly
position and level the back box in the stud wall.
-
U.L. listed (UL File No. E21609)
|
|
MOUNTING LIMITATIONS
-
1. For wall mounting - Do not install back box
closer than 4-inches from floor or 6-inches away from adjacent wall.
-
2. Do not install heater behind towel rack,
behind door, in floor, in closet, in ceiling, or where air flow may be
obstructed.
-
3. For horizontal
mounting only (heater cannot be mounted vertically along its length.)
Clip~N~FitTM
feature (US Patented No.6,172,343) allows the installer to change the
wattage of the heater to a lower output without moving jumper wire. Each heater
is factory wired for its maximum wattage. To change wattage, clip out either
jumper 1 or 2 as shown in the installation manual for desired wattage. This
Patented Clip~N~FitTM feature also prevents the operator to change
wattage after installation to a higher wattage.
Dimensions (in inches)

Note: Knockouts in top - same dimensions as bottom
|
Secure
Online Ordering
*Delivery time for the following products: Typically
in stock. Shipped in 1 working day or less. The transit time to you depends on your
physical location and your selected UPS/FedEx shipping method, the cost of which will be displayed in your shopping cart.
|
|
Item ID |
Catalog
# |
Volts |
Watts |
Amps |
Built-In T-stat |
Price |
Click "Select" below to see the actual quantity in stock |
|
QMARK685360033693 |
GFR1500T2 |
120 |
1500/1125/750/375
|
12.5/9.4/6.3/3.1
|
Double Pole |
$154.65 |
 |
|
QMARK685360033686 |
GFR1500 |
120 |
1125/750/375 |
9.4/6.3/3.1 |
No |
$142.29 |
 |
| QMARK685360033778 |
GFR2404T2 |
240 |
2400/1200 |
10.0/5.0 |
Double Pole |
$154.65 |
 |
|
QMARK685360033747 |
GFR2004T2 |
240 |
2000/1500/1000/500
|
8.3/6.3/4.2/2.1
|
Double Pole |
$154.65 |
 |
|
QMARK685360033754 |
GFR2404 |
240 |
2400/1200 |
10.0/5.0 |
No |
$142.29 |
 |
|
QMARK685360033723 |
GFR2004 |
240 |
2000/1500/1000/500
|
8.3/6.3/4.2/2.1
|
No |
$142.29 |
 |
| Optional
Accessories: |
| QMARK685360059266 |
GFRSM |
Surface Mounting Frame |
$22.42 |
 |
|
QMARK685360033679 |
GFRTSP |
Single Pole Built-In Thermostat, 25 AMPS © 120-240V |
$20.00 |
 |
|
QMARK685360033662 |
GFRTDP |
Double Pole
Built-In Thermostat, 25 AMPS © 120-240V |
$22.94 |
 |
|
Wall Mount Thermostats: (Optional) |
|
WR10001 |
WR-65 |
1A65-641 SPST Thermostat, 40°F to 85°F, 22 amp 120/240V, 18 amp 277V, Single Pole, wall mount |
$26.35 |
 |
|
WR10002 |
WR-66 |
1A66-641 DPST Thermostat, 40°F to 85°F, 22 amp 240V, 18 amp 277V, Double Pole (D.P.S.T., Includes off
position), wall mount |
$26.35 |
 |
|
AUBE10003 |
TH106 |
Aube Tech. 120/240V, S.P.S.T., Programmable Line Voltage
Thermostat |
$63.67 |
 |
|
AUBE10010 |
TH115-A-240D |
Aube Tech. Double Pole, 240V Programmable Line Voltage Thermostat.
3600W @ 240V 15 Amp resistive 60 Hz 4 wires / DPST. 7-day programming,
pre-programmed, backlight. 4 wires / DPST |
$66.17 |
 |
|
QMARK98319841025 |
TC1 |
Qmark Clear Plastic Universal Lockable Thermostat Guard. Dimensions: 7"L x
4.28"H x 2.74"D. |
$52.20 |
 |
|
*This delivery time is
for normal conditions and is subject to Qmark factory availability. |
Qmark®
is a registered trademark and division of Marley
Engineered Products.
|