 
 5880 Alpine Ave. NW, Comstock Park, MI 49321 USA - Tel 616-784-1121 - 800-442-2581 - Fax 616-784-7775 - E-mail sales@heatersplus.com |
|
When you are ready to order you
will be taken to our secure online ordering website:
www.MorElectricHeating.com. Visit our other websites for home, office and factory infrared heating, fans and air conditioning: www.InfraredHeaters.com and www.Fans-Plus.com. |
   |
Markel Products Co.
We are an authorized distributor for
Markel Products Co.,
a division of TPI Corp.,
a manufacturer of Baseboard, Wall and Ceiling Heaters
and ventilation equipment and lighting equipment.
 |
TSH Series Fan Forced Kickspace Specialty Heater. Fits into soffits, stair risers or under utility cabinets, Finned steel sheath heating element and manual reset thermal cut-out, Recessed opening: L = 22 3/8” W = 3 5/8” D = 11 1/2” |
 |
3900 Hydronic Baseboard Heaters. Permanent mount, liquid filled elements, Residential models in “White” powder coat finish, Commercial models available in “Bankers Bronze”, Extruded 12 gauge aluminum housing |
 |
ICH-240C Fan Forced Utility Heater. CONSTRUCTION SITE / UTILITY HEATER, Operates on 240v or 208v, Steel tubular heating element, 43°F air heat rise, Internal overheat thermostat, Temperature control thermostat, 6' long cordset |
 |
178 TMC Ceramic Fan Forced Heater. 850w & 1500w heat settings plus fan only setting. Automatic reset type limit control. Thermal cut-off device. 6' long - 3 conductor cord. Temperature control thermostat. Width: 11 1/4'. Height: 10". Depth: 7" |
 |
HF Fan Forced Portable Unit Heater. Operates on 240v or 208v, Finned steel tubular heating element, Internal manual reset thermal cut-out, 6' long cord with molded plug, Temperature control thermostat with 35°F to 85°F range, 10’ air throw - 262 CFM. Swivel base can be used as a wall, floor or ceiling mount |
 |
Type HLA Hazardous Location Unit Heaters. Suspended Fan-Forced Unit Heaters. 3 to 25KW at 208 to 600 volt. They're designed for rugged industrial applications in hazardous locations where the possibility of explosion or fire exists due to flammable gases, vapors, powdered metals or dusts. |
 |
Type FEP Hazardous Location Cabinet Unit Heaters. NEMA 4 Hose-Down Hazardous Location Convection Heaters are for use in: "Class I, Division I & II, Groups B, C & D." (T2A-UL, CSA, T3A-CSA). Voltages range from 120V to 600V. |
 |
TaskMaster 5100 Heavy Duty Unit Heater. Suspended Fan-Forced Unit Heaters ranging in size from 3 to 25KW at 208 to 600 volt. |
 |
170-TS Under the Desk Heater. TPI Corp./Markel/Fostoria Confined space radiant heat panel. 170 Watts, 120 Volts, 1 Phase, 580 BTU's, 6 foot long plug and cordset, 22-3/4 inch x 8 inch x 1-3/4 inch |
 |
PCH-48C Portable Quartz Infrared Heater. TPI Corp./Markel/Fostoria Spot Heater. 1500 Watts, 120 Volts, 1 Phase, 5120 BTU's, 15 foot plug and cordset, height adjust from 2 to 6 feet |
 |
Type RPH Pump House Convection Heater Powder coated epoxy steel case. Provides excellent protection against freezing for pump houses, utility rooms, relay stations, construction sheds, and many other industrial spaces. aluminum finned heating element. High and Low heat control. |  |
GCH-4000 Fan Forced Garage/Shop Heater. Fostoria Markel/Tpi Corp. Operates on 240v or 208v. Wall/Ceiling Mount Included - 4000/3000 Watts at 240/208 V - 43F temperature rise - Built in bi-metal double pole thermostat - 50F to 90F range - Steel tubular heating element |
|
Mor Electric Heating Assoc., Inc. is a
Distributor of Industrial, Commercial and
Residential Heaters and Controls. |
|
When you are ready to order you will be taken to our secure online
ordering website:
www.MorElectricHeating.com. |
    |
|
|
|
MOR
ELECTRIC HEATING ASSOC., INC. |
