|
Qmark Type MUH-35 Unit Heater
- Fan-Forced, Metal Sheath -
Hard-Wired Heater with Thermostat
- Mounts either on the wall or from the ceiling can be used
for primary or spot heating. For factories, garages, schools, etc.
- Airflow can be directed horizontally, vertically or any
position between for precise control.
- Multiple wattage heat selector switch. Either 5KW or 3.3KW @ 240V (3.7KW or 2.5KW @ 208V) for
just the right amount of heat.
- Fan only switch allows fan to cycle automatically with
elements or run continuously for air movement when no heat is required.
- Built-in bi-metal thermostat. Range 40° to 90°F.
- Heater is shipped with ceiling/wall bracket.
- Heavy gauge die-formed steel housing.
- Advanced pull-through air flow design draws air across
heating element for more even air distribution and cooler element operation.
- Specially designed venturi outlet to meet that added throw
as required in vertical position.
- Completely enclosed fan motor. 1/100 hp,
1600 rpm
- Air delivery data: 210 cfm, 550 fpm
- Maximum effective mounting height: 8'
horizontal, 51; vertical, horizontal air throw 24', AWG 10 wire size
- Statuary Bronze Finish
- Aluminum-finned, copper clad steel sheath heating element
has longer useful life, because of cooler sheath temperature and faster heat
dissipation.
- Automatic reset linear thermal cut-out capillary type,
provides protection over entire length of element area.
- Ruggedly built, yet lighter weight for easier installation.
No piping flues, valves, or traps.
- Meets all UL, NEC, and OSHA requirements.
UL Listed.
-
| Selecting the quantity and wattage of heaters you will need in
a given area depends on whether you are using the heaters as a primary heat
source (no other heaters present) or supplementing existing heaters such
as a forced air furnace system. A general rule of thumb for primary
heating is to use 10 Watts /
Square Foot of heat. Example: a 10'x10' room is 100 square feet:
100 x 10 W/Ft2 = 1000 Watts.
Keep in mind that this is for an insulated building or room insulated to "electric heating" standards and is an
estimation based on average conditions. |
Secure
Online Ordering
Delivery time: typically ships in 1 working day or less plus the time of
your selected UPS shipping method. Your shipping cost will be displayed in your shopping cart. This delivery time is for normal conditions and is
subject to Qmark factory availability. |
|
Item ID |
Catalog# |
Volts |
Watts |
BTUH |
Amps |
Price |
Click "Select" below to see the actual quantity in stock |
|
QMARK685360047577 |
MUH-35 |
240 |
5000/3333 |
17061/11372 |
21.0/14.0 |
$306.42 |
 |
| 208 |
3750/2500 |
12795/8530 |
18.0/12.0 |
Qmark® is a
registered trademark of Marley Engineered Products.
|
