5880 Alpine Ave. NW, Comstock Park, MI 49321  USA
Tel 616-784-1121, 800-442-2581, Fax 616-784-7775, E-mail sales@heatersplus.com


visit our other website for home/office/factory infrared heating:
 InfraredHeaters.com

view cart

Chromalox Dragon Portable DRA Industrial Electric Blower Spot Comfort Heater

Order Online Secure Credit Card ordering online

Chromalox Electric Heaters and Controls
Mor Electric Heating is an authorized distributor for Chromalox®

  • 7.5 TO 30 kW
  • 208, 240, 480, 600 Volts.  240 Volt rated for 240 or 208 Volts
  • Single or 3-Phase Field Convertible Through 20 kW
  • 25,590 to 102,360 BTU Hour
  • UL Listed and CSA Certified
  • Shipped fully assembled.

The Chromalox DRA is a rugged industrial grade, self contained, highly mobile, electric blower heater. The DRA can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. The built in safety features include an adjustable thermostat to control the outlet air temperature, auto-reset cutouts for the fan motor and heating elements. The thermo-stat provides settings for full off, fan only and temperature control in the heating setting. Dragon heaters feature a large, easily accessible control and wiring compartment containing a magnetic contactor; additional safety is provided by a 120 volt control voltage transformer and motor starter on 480 and 600 volt units. The bright red polyester powder coated heating cylinder is highly visible and can be rotated to direct heat or fan driven air movement where it is needed. For assured safety, all standard units meet the requirements of UL (File No. E207486) and CSA (File No. LR40859).

Leg Assembly
 Each side consists of a one piece, 12 gauge, formed steel member, which accepts a steel tubular handle, held in place with a 1 1/2" long x 1/4" bolt on each side. The handle can be raised from the shipping position if desired. The rubber, pneumatic wheels are 10" diameter and 3 1/2" wide to provide ease of transporting the heater on irregular and gravel surfaces. The large wheels make it easy to roll up stairways without damage to decorative step surfaces.

Heating Cylinder
 A structural frame consisting of 2 spun steel rings and 2 formed steel channels support a 20 gauge steel cylinder phosphate coated for corrosion resistance, and finished in red polyester powder coat paint. The heating cylinder pivots vertically to direct air flow.

Safety Guards
Front and rear grills are 10 gauge finished in black polyester powder coat and are designed to meet OSHA safety requirements.

Heating Assembly
 The patented metal sheath Fintube® heating elements consist of steel fins furnace brazed on industrial grade .475 diameter steel sheath tubular heaters for maximum heat transfer. The elements are held in place with steel bulkhead fittings for durability. The elements feature a high temperature finish for corrosive protection.

Fan Assembly
 The self-centering fan assembly consists of a totally enclosed, permanently lubricated motor and a dynamically balanced aluminum fan blade for smooth, quiet operation.

Controls
 A thermostat, with a temperature range of 40 °F to 100 °F is included, with a full off position, a fan only position and an adjustable range of temperature settings in the heating mode position. Each unit includes a 3 pole magnetic contactor and auto-reset thermal cutout. 480 volt and 600 volt units also include a motor relay and 120 volt control voltage transformer for personnel safety.

Applications

  • Any Commercial or Industrial Application Needing Instant Fan Forced Heat
  • Building Construction
  • Curing Plaster and Concrete
  • Warming Workers
  • Thawing Frozen Pipes
  • Thawing Railroad Cars
  • Heating Large Tents
  • Non-Hazardous Areas
  • For best results, use in an enclosed area with ceiling heights below 15 feet.

Advantages

  • No Fumes or Annoying Smell
  • Safer, No Open Flame
  • Safe to Operate in Unattended Areas
  • No moisture added to the air - oil and gas fuels add moisture to the air
  • Minimum Maintenance
  • No fuel to store
  • Long horizontal Air Throw
  • Quiet Operation
  • Easy Installation
  • Field Convertible Sizes for 1 or 3 Operation
  • 240v Units Can Be Used on 208v Power Sources
  • Fan Only For Summer Cooling
  • Single Knob Adjustment of Fan Direction
  • No Assembly Required
  • Long Life Industrial Finned Tubular Heating Elements and High Limit Thermal Cut-out Switch

Cord & Plug Selection Guide:
Power Cord based on 600V Hard Service Cord Rated 90C

Cubic Feet Heated In 2 Hours With One Heater:
Temperature Rise °F

Heater Output kW
7.5 9.75 15 20 30
10 35,000 45,500 70,000 93,330 140,000
20 17,500 22,750 35,000 46,650 69,980
30 11,667 15,170 23,340 31,110 46,670
40 8,750 11,375 17,500 23,330 35,000
50 7,000 9,100 14,000 18,670 28,000
60 5,830 7,580 11,660 15,550 23,300
70 5,000 6,500 10,000 13,335 20,000
80 4,375 5,690 8,755 11,675 17,500
90 3,890 5,060 7,785 10,380 15,600

Area heated assumes 15’ maximum ceiling height and with little or no outside exposure. No roof or floor with outside exposure; only one wall exposed with not over 15% door and window area.

Secure online Credit Card ordering - SSL encryption.

Delivery times:

For heaters with a stock status of S (Stock): Typically in 5-7 workdays or less plus the time of your selected UPS shipping method.

For heaters with a stock status of NS (Non Stock): These products are non-returnable. Typically ships in 25-27 workdays or less plus the time of your selected UPS shipping method.

Cable kits and Plug kits are (S) Stock

Price below does not include shipping cost which is calculated using your address before entering your credit card number.
Item Id Catalog No. kW Volts Phase Amps* BTU/H HP CFM Temp Rise  (°F) Stock Wt. (Lbs.)

Price

 Click "Select" below to see the actual quantity in stock
CHROM295523 DRA-07-83 7.5 208 1 and 3 36.3/21.0 25,590 0.06 1070 23 NS 65 $1,119.00

Select
CHROM295531 DRA-07-23 7.5/5.6 240/208 1 and 3 31.5/18.3** 25,590 0.06 1070 23 S 65 $1,119.00

Select
CHROM295540 DRA-10-83 9.75 208 1 and 3 47.1/27.3 33,267 0.06 1070 31 S 65 $1,136.00

Select
CHROM295558 DRA-10-23 9.7/7.3 240/208 1 and 3 40.8/23.7** 33,267 0.06 1070 31 S 65 $1,136.00

Select
CHROM295566 DRA-15-83 15 208 3 41.8 51,180 0.06 1070 46 NS 65 $1,138.00

Select
CHROM295574 DRA-15-23 15/11.2 240/208 3 36.3** 51,180 0.06 1070 46 S 65 $1,138.00

Select
CHROM295582 DRA-15-43 15 480 1 and 3 31.4/18.2 51,180 0.06 1070 46 S 65 $1,181.00

Select
CHROM295596 DRA-15-93 15 600 1 and 3 25.2/14.6 51,180 0.06 1070 46 NS 65 $1,289.00

Select
CHROM295603 DRA-20-23 19.5/15 240/208 3 47.1** 66,534 0.06 1070 61 S 75 $1,509.00

Select
CHROM295611 DRA-20-43 20 480 1 and 3 42.0/24.4 68,240 0.06 1070 62 S 75 $1,357.00

Select
CHROM295620 DRA-20-93 20 600 1 and 3 33.5/19.4 68,240 0.06 1070 62 NS 75 $1,423.00

Select
CHROM295638 DRA-30-43 30 480 3 36.3 102,360 0.06 1070 92 S 75 $1,585.00

Select
CHROM295646 DRA-30-93 30 600 3 29.1 102,360 0.06 1070 92 NS 75 $1,640.00

Select
+ = Temperature rise at 240V operation
* = Includes motor amps
** = 208V amperage is 86% of 240V value
All units are factory wired for 3 phase operation. Models designated 1 and 3 phase can be field wired for single phase operation.

Plug Kits:


PGL-15-20
PGL-15-30
PGL-16-30
PGL-17-30
PGL-3763C

 
PGN-6-50
PGN-15-20
PGN-15-50		  
Item Id Catalog No. Plug Type Description Volts Amps NEMA# ANSI# Cable Dia

Price

 Click "Select" below to see the actual quantity in stock
CHROM338845 PGL-15-20 Locking 3 Pole, 4Wire 250 20 L15-20 C73.85 .385”-.780 $80.60

Select
CHROM338853 PGL-15-30 Locking 3 Pole, 4 Wire 250 30 L15-30 C73.86 .385”-.780 $96.50

Select
CHROM338861 PGL-16-30 Locking 3 Pole, 4 Wire 480 30 L16-30 C73.88 .595”-1.150 $96.50

Select
CHROM338870 PGL-17-30 Locking 3 Pole, 4 Wire 600 30 L17-30 C73.89 .595”-1.150 $97.55

Select
CHROM338917 PGL-3763C Locking 2 Pole, 3 Wire 600 50 - - .750”-1.125 $267.00

Select
CHROM338888 PGN-6-50 Non Locking 2 Pole, 3 Wire 250 50 6-50 C73.53 .625”-1.187 $188.00

Select
CHROM338896 PGN-15-20 Non Locking 3 Pole, 4 Wire 250 20 15-20 C73.59 .390”-.775 $126.00

Select
CHROM338909 PGN-15-50 Non Locking 3 Pole, 4 Wire 250 50 15-50 C73.61 .750”-1.250 $176.00

Select
The above plugs are designed to be used with specific ranges of cable diameters. If not used with Chromalox Cable Kits, check cable manufacturers cable diameter to be sure plug fits selected cable.

Cable Kits for Chromalox DRA Series Portable Blower Heaters

Cable packages include 25 feet Type SO cable, with either 3-conductors or 4-conductors, depending on the heater requirements. Each cable assembly includes the proper cord (connector). Plugs are not included. All models are factory wired for 3-phase, but can be field wired for single phase, select plug and cord accordingly.
Item ID Catalog No. Used on Heaters Size/Type Max. Amp Temperature
Ratings		 NPT

Price

 Click "Select" below to see the actual quantity in stock
CHROM295427 PLC-2514-4 15kW 600V 3PH 14/4 SO 15 90 Deg.C 3/4” $84.80

Select
CHROM295435 PLC-2512-4 7.5kW 240V 3PH
15kW 480V 3PH
20kW 600V 3PH		 12/4 SO 20 90 Deg.C 1” $95.40

Select
CHROM295443 PLC-2510-3 15kW 600V 1PH 10/3 SO 30 90 Deg.C 1” $97.55

Select
CHROM295451 PLC-2510-4 7.5kW 208V 3PH
9.75kW 240V 3PH
20kW 480V 3PH		 10/4 SO 25 90 Deg.C 1” $110.00

Select
CHROM295460 PLC-2508-3 7.5kW 208V 1PH
7.5kW 240V 1PH
15kW 480V 1PH
20kW 600V 1PH		 8/4 SO 35 90 Deg.C 1” $130.00

Select
CHROM295478 PLC-2508-4 9.75kW 208V 3PH
30kW 600V 3PH		 8/4 SO 35 90 Deg.C 1” $170.00

Select
CHROM295486 PLC-2506-3 9.75kW 208V 1PH
9.75kW 240V 1PH
20kW 480V 1PH		 6/3 SO 55 90 Deg.C 1” $181.00

Select
CHROM295494 PLC-2506-4 15kW 240V 3PH
30kW 480V 3PH		 6/4 SO 45 90 Deg.C 1” $214.00

Select
CHROM295515 PLC-2504-4 19.5kW 240V 3PH 4/4 SO 60 90 Deg.C 1 1/4” $268.00

Select
SO = hard Service Cord, 600V Length = 25 Feet

Chromalox Installation, Operation and Renewal Parts Identification
 Chromalox Product Information Sheet

 You must have the free Adobe Acrobat Reader plug-in.

Chromalox® is a registered trademark.

[ Home ] [ Up ]

view cart

heaterscontrolsaccessorieslightingfans

Mor Electric Heating Assoc., Inc. is a Distributor of Industrial, Commercial and Residential Heaters and Controls.
Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website.

visit our other website for home/office/factory infrared heating:

MOR ELECTRIC HEATING ASSOC., INC.
5880 Alpine Ave. NW, Comstock Park, MI 49321  USA, Tel 616-784-1121, 800-442-2581, Fax 616-784-7775, E-mail sales@heatersplus.com