|
Eemax Series Two Tankless Instantaneous Water Heaters
Secure Credit Card ordering online
We are a distributor for Eemax Inc.
|
EX190T, EX144T
For your whole house or condo, the model you require is
the EX190T or EX144T.
These units will provide 0.75-2.5 GPM of showering
temperature water. Cold water inlet only.
These units are best served when serving only one major
outlet at a time. |
 |
EX190T2, EX144T2
Ideally suited for any booster type
application. These units will supply hot water up to 180 F.
They can be fed with either hot or cold
water. |
 |
EX190P2, EX144P2
These models are perfect for mop sinks and
industrial higher water flow rate applications.
Flow rates of up to 3 GPM with cold water
inlet only.
Temperature controlled by the flow rate of
water. |
Specifications
"RESIDENTIAL MULTI POINT"
ELECTRICAL and TEMPERATURE RATINGS:
|
MODEL
|
VOLTS
|
kW
|
AMPS
|
Temperature Rise at/GPM
|
Wire Size
|
| |
|
|
|
1.0
|
1.5
|
2.0
|
2.5
|
3.0
|
AWG
|
|
EX1608T |
208V* |
16.6kW |
77(2x38.5)
|
- |
- |
55º |
45º |
38º |
8 |
|
EX144T |
240V* |
15kW |
64(2x32)
|
102º |
65º |
51º |
39º |
34º |
8 |
|
EX190T |
240V* |
19kW |
80(2x40)
|
130º |
87º |
65º |
52º |
43º |
8 |
|
EX160T |
277V |
16kW |
58(2x29)
|
110º |
73º |
55º |
44º |
32º |
8 |
|
EX200T |
277V |
20kW |
72(2x36)
|
130º |
91º |
68º |
54º |
21º |
10 |
This unit is ideal for serving an entire condo, apartment,
smaller house or cabin. It would replace the existing tank type water heater,
being fed with cold water only. Minimum switch on flow rate 0.75 GPM. Easily
adjustable thermostat gives exact temperature control.
- APPLICATIONS:
- Residential Showers
- Industrial Processes
- Photo Processing
- Adjustable, Precise Temperature Setting ±0.5°F.
"COMMERCIAL FLOW CONTROLLED"
ELECTRICAL and TEMPERATURE RATINGS:
|
MODEL
|
VOLTS
|
kW
|
AMPS
|
Temperature Rise at/GPM
|
Wire Size
|
| |
|
|
|
1.5
|
2.0
|
2.5
|
3.0
|
AWG
|
|
EX1608P2
|
208V* |
16.6kW |
77(2x38.5)
|
- |
55º |
45º |
38º |
8 |
|
EX144P2 |
240V* |
15kW |
64(2x32)
|
65º |
51º |
39º |
34º |
8 |
|
EX190P2 |
240V* |
19kW |
80(2x40)
|
87º |
65º |
52º |
43º |
8 |
|
EX160P2 |
277V |
16kW |
58(2x29)
|
86º |
55º |
43º |
32º |
8 |
|
EX200P2 |
277V |
20kW |
72(2x36)
|
55º |
41º |
27º |
21º |
10 |
"PARALLEL" Flow Control Models (Twin Module).
Recommended for higher flow rate hot water applications.
Fitted with ½" compression fittings and bottom entry
electric. Feed with cold water only
(i.e. Industrial Processes). Min. flow 1.5 GPM.
- APPLICATIONS:
- ·Industrial Processes
- ·High Flow Activation
- ·Cold Water Feed Only
- ·Laboratories
"COMMERCIAL HIGH FLOW BOOSTER"
ELECTRICAL and TEMPERATURE RATINGS:
|
MODEL
|
VOLTS
|
kW
|
AMPS
|
Temperature Rise at/GPM
|
Wire Size
|
| |
|
|
|
1.5
|
2.0
|
2.5
|
3.0
|
AWG
|
|
EX1608T2
|
208V* |
16.6kW |
77(2x38.5)
|
- |
55º |
45º |
38º |
8 |
|
EX144T2 |
240V* |
15kW |
64(2x32)
|
65º |
51º |
39º |
34º |
8 |
|
EX190T2 |
240V* |
19kW |
80(2x40)
|
87º |
65º |
52º |
43º |
8 |
|
EX160T2 |
277V |
16kW |
58(2x29)
|
86º |
55º |
43º |
32º |
8 |
|
EX200T2 |
277V |
20kW |
72(2x36)
|
55º |
41º |
27º |
21º |
10 |
"PARALLEL" Models (Twin Module) With Two Thermostats
For preheated water feed (dishwashers, photo processing,
etc.). Min. flow, 1.5 GPM.
- APPLICATIONS:
- Commercial Dishwashers
- Photo Processing
- Booster (Solar}
- Commercial/Industrial
- Adjustable, Precise Temperature Setting ±0.5°F (up to
180°)
QUALITY FEATURES
- On Demand Hot Water - no
delay.
- Continuous Hot Water - no
storage capacity to run out.
- Reduces Installation Cost - no
T & P relief valve needed (check local codes).
- Easy Installation - only one
cold water line need be brought to lavatory - integral ½" compression fittings
on bottom (no sweat connections).
- Cut Energy Waste - flow switch
activates heater only on demand (no standby heat loss).
- Available thermostatic control "T"
helps insure accurate outlet temperatures (±0.5°F).
- Designed for Durability -
constructed of high strength reinforced "ENGINEERING PLASTIC".
- Ni Chrome Element - a unique,
patented flow path ensures optimum heat transfer and extended element life.
- Compact Size - dimensions
10"x9"x3"; weight 8 lbs.
- Reduces calcification.
- Field Serviceable Elements
replaceable cartridge element (1 year warranty).
- Warranty - Full Factory
Warranty - Heaters are guaranteed against the failure due to leaks of "Heater
Body/Element Assembly" for a period of TEN YEARS.
- Unit must be mounted on wall.
 |
SPECIFICATIONS:
Dimensions: 10"x9"x3"
Weight: 8 lbs.
Materials:
Cover: Enameled Steel.
Glass reinforced "NORYL"* Heater Body
and Ni Chrome Element
Color: White
Element: Dual replacement cartridge inserts
Pipe-Fittings: ½" compression at bottom of unit.
U.S. Patent #'s: 4,960,976 and 4,762,980
*NORYL is a registered trademark of General
Electric Company
|
 |
SPECIAL DESIGN SERVICE
INQUIRIES FOR UNITS FOR UNIQUE APPLICATIONS ARE
WELCOME. CONTACT US. |
All units must have 2 independent
electrical circuits using correctly rated wire and 2 circuit breakers.
Recommended Wire Size is per module
| 
