5880 Alpine Ave. NW, Comstock Park, MI 49321  USA - Tel 616-784-1121 - 800-442-2581 - Fax 616-784-7775 - E-mail sales@heatersplus.com

When you are ready to order you will be taken to our secure online ordering website: www.MorElectricHeating.com. Visit our other websites for home, office and factory infrared heating, fans and air conditioning: www.InfraredHeaters.com and www.Fans-Plus.com.

view cart

Links to other cartridge heaters:
Dalton Electric 1/4" - 1" Split Sheath Cartridge Heaters
Chromalox Cartridge Heaters

301 Newbury Street, Unit 241, Danvers, MA 01923
www.SunElectricHeater.com

We are an authorized distributor for Sun Electric Heater Company.

Advanced Split-Sheath Design Provides These Features:

• A high temperature alloy split-sheath with a unique ability to expand for maximum heat transfer.
• A continuous nickel-chromium resistor element. No cold spots or cold ends, as found in conventional cartridge heaters.
• Magnesium oxide electrical insulation of the highest possible density - 96% of theoretical.
• Lead connections welded to the resistor, exiting through continuous insulation that can be bent sharply at the heater without exposing the conductors.
• The result? A superior cartridge heater offering longer life, uniform temperatures, and easy installation in the tightest spots.

Benefits to Your Heating Process

• Longer Life- When energized the opposing heater legs push apart, locking into contact with the surrounding bore for maximum heat transfer. Cooler operation means longer service life.
• Easy Removal- When de-energized the heater legs contract, breaking contact for slide-out removability.  SunRods are guaranteed never to seize !
• Uniform Heating- The continuous resistor provides consistent heat along the heater body. Even the tip is heated, providing uniform heat to your process.
• Heat Wherever You Need It- SunRods can be built in lengths down to 1/2 inch. Just drill a small bore and slide in a Hot Tip SunRod!

Experience
Sun's technical staff embodies over 25 years of experience in industrial heating applications. The chief technical officer is the original inventor of the split-sheath cartridge heater.

Service
Mor Electric Heating provides application assistance to ensure the proper heater selection for best performance. If a non-stock heater is required, Sun will design, build and ship on a rush basis. (Request "Rush Delivery" on your order. )

Quality
All heater designs are computer-generated to ensure consistent quality from lot to lot. Additionally, Every unit is subjected to stringent in-process testing and to multi-point quality assurance tests prior to shipment.  All Sun Electric heaters are marked with a customer-readable date code for warrantee verification.

• Heater Length
• Wattage
• Voltage
• Optional Features, if any (Right Angle Header, RTV Moisture Seal or Epoxy Moisture Seal)
• Rush Delivery, if required (Non-stock heaters can be manufactured on a rush basis. Request "Rush Delivery" on your order.)
• Lead wires type and length: 450 F Fiberglas (standard), 450 F Teflon (flexible) or 800 F Mica (high temperature)

• Five piece minimum quantity order per line item
• Sun reserves the right to over-ship by 10%, with a one piece minimum.

Optional Controls:

Only controls the 120 Volt cartridge heaters (Not for use with the 24V cartridge heaters)
Chromalox CH-152
Payne Engineering 18TBP SCR Power Controls
Chromalox VCF Percentage Timing Input Controller
Fenwal 17000 Series Cartridge Style Thermoswitch

Stock SunRod Cartridge Heaters:

Stock units come with 12" #24 Gauge Fiberglas Leads, Rated to 482F

5 piece minimum quantity order per line item

[ Home ] [ Up ]