 |
FFH Quartz Tube Assemblies. 900 watt,
120 volt comfort spot heating for residential and commercial applications. Hang by its chains and plug into
any 120 volt service with 8 foot grounded cord set.
Protective guard and gold anodized aluminum reflectors. FFH heaters
are excellent for farrowing applications. |
 |
3900
Hydronic Baseboard Heaters. Permanent mount, liquid
filled elements, Residential models in “White” powder coat finish,
Commercial models available in “Bankers Bronze”, Extruded 12 gauge
aluminum housing |
 |
FFH Quartz Tube Assemblies. 550 watt,
120 volt comfort spot heating for residential and commercial applications. Hang by its chains and plug into
any 120 volt service with 8 foot grounded cord set.
Protective guard and gold anodized aluminum reflectors. FFH heaters
are excellent for farrowing applications. |
 |
Mul-T-Mount Quartz Lamp
Assemblies. Comfort spot heating and snow melting. (208-480 volts)
3 element and 2 element Mul-T-Mount. Total Area Heating, Indoor Spot/Zone
Comfort Heating, Outdoor Spot/Zone Comfort Heating or snow & ice control.
The units are UL listed for both semi-exposed and completely exposed
outdoor areas. |
 |
Mitey Midget Quartz Lamp
Assemblies. Comfort spot heating. Indoor
industrial and commercial comfort heat applications such as: work
stations, aisleways, freezer doors, farm buildings, pump houses and
smoking shelters. Quartz lamps or tubes |
 |
OCH-SERIES Outdoor
Trimline Quartz Tube Comfort Spot Heating Assemblies. Overhead "Spot"
or "Zone" heating applications. Nearly instantaneous heat-up and can
provide heat for specific areas within a large area. 120V-480V 1500-3000W,
two lengths; 46" & 57", Built-in Adjustable Mounting Bracket, allows for a
45-degree tilt of the heater housing, NEMA-4 Electrical Box and Frosted
Quartz Tube. |
 |
HDO Heavy Duty Comfort
Heating Assemblies. Metal sheath elements. Fostoria
Heavy Duty Infrared Heaters are for use in factories, warehouses,
maintenance areas, machine shops and any application that exposes the
fixture to shock and vibration. Fostoria's u-shaped metal sheath elements
are stable and more shock resistant than quartz lamps or tubes. |
 |
RPH Quartz Lamp Assembly. Restaurant
patio and golf driving range heater. Ruby Red Quartz
Lamp Included. 1600 Watts (208 or 240 Volts) Single-Phase Wiring. Optional
Accessory: Wire Guard (RPHWG) 60° Symmetrical Reflector Pattern
(Coilzak Bright Aluminum Reflector) |
 |
Quartz T-3 Lamp Replacement Elements.
3/8" diameter clear or red quartz envelope. Pigtail lead wires are approx.
6" length. |
 |
CH Portable or Suspended Quartz
Tube Assemblies. Mounted either on a two-wheel cart or suspended by chains.
120 volt with two 1000 watt quartz tubes; or 240 volt with four 1425 watt
quartz tubes FHK-1 Cart: Welded steel frame. 15' grounded cordset, molded
plug. Choose from a two tube
(120 volt) unit (Special non-household 20 amp, 120 volt receptacle
required) or four tube (240 volt) unit, mount on a two-wheel cart (FHK-1),
or suspend by chains from the ceiling. |
 |
U-Shaped Metal Replacement Elements.
.430" diameter Inconel metal sheath. Available wattages: 1800 to 4500W.
Available voltages: 120 to 600V |
 |
Quartz Tube Replacement Elements
Translucent quartz as the enclosure. 5/8" diameter clear quartz envelope
Nickel-chrome alloy coiled element. |
 |
FHK Portable Comfort
Space Heaters. Infrared Job-Site Heater. 120-577 Volts. Infrared Job-Site Heater.
Industrial grade
construction includes a gold anodized aluminum reflector, and a heavy duty
safety screen. Steel two-wheeled cart, (powder coated black), and large diameter wheels.
U-shaped inconel metal sheath infrared heating element; nickel-chromium
heating coil is embedded in magnesium oxide powder . Cable Kits available
for models that do not include a cordset. |
 |
TaskMaster 5100 Heavy Duty Unit Heater.
Suspended Fan-Forced Unit
Heaters ranging in size from 3 to 25KW at 208 to 600 volt. |
 |
Pre-Wired
Contactor Panels, 50-300 amps, 1-6 contactors, NEMA 1 Enclosures.
A contactor panel is necessary to handle the heating KW load in a given
infrared installation. |
 |
Type FEP Hazardous
Location Cabinet Unit Heaters. NEMA 4 Hose-Down
Hazardous Location Convection Heaters are for use in: "Class I, Division I
& II, Groups B, C & D." (T2A-UL, CSA, T3A-CSA). Voltages range from
120V to 600V. |
 |
FTC-30 30-Minute
Manual Timer. Inline or connect to contactor panel.
Includes time switch, wall plate and knob control. Recommended for a 2-1/2"
deep double gang box, or installed outside using a NEMA type 3R enclosure
(not supplied). 208/240
Volts |
 |
VHC-15 controller. Solid State Variable
Device controls heat loads up to 15-Amps. 208/240Volt "In-Line"
Controller. Built in On/Off knob switch with surface plate included.
Designed for a 2" x 4" electrical wall box mounting. Can operate both
Quartz Lamp & Quartz Tube Infrared Heaters |
 |
178 TMC
Ceramic Fan Forced Heater. 850w &
1500w heat settings plus fan only setting. Automatic reset type limit
control. Thermal cut-off device. 6' long - 3 conductor cord. Temperature
control thermostat. Width: 11 1/4'. Height: 10". Depth: 7" |
 |
Heat Wave
(240-600 Volt electric indoor space heater)
Safety yellow heater enclosure with safety screens on both air intake and
output openings. Optional 25' long SO type cord, ready for plug attachment
is available for each model. Thermostat adjustment 40° to 100° F . Switch
for fan only operation 800 CFM - 15 KW units, 1100 CFM - 30 KW units |
 |
ICH-240C
Fan Forced Utility Heater.
CONSTRUCTION SITE / UTILITY HEATER, Operates on 240v or 208v, Steel tubular
heating element, 43°F air heat rise, Internal overheat thermostat,
Temperature control thermostat, 6' long cordset |
 |
Type HLA
Hazardous Location Unit Heaters.
Suspended Fan-Forced Unit Heaters.
3 to 25KW at 208 to 600 volt. They're designed for rugged
industrial applications in hazardous locations where the possibility of
explosion or fire exists due to flammable gases, vapors, powdered metals
or dusts. |
 |
Modular
Loading Dock Fan/Light 24" / 40" / 60" LONG ARMS
WITH TWO ELECTRICAL OUTLETS TO ACCOMMODATE A FAN, A LIGHT OR A FAN AND A
LIGHT. Modular Fan, 18" high velocity circulator plugs into electrical
outlet on arm. Modular Lights - Wire guard included with each type of
light head. |
 |
HF Fan Forced
Portable Unit Heater. Operates on
240v or 208v, Finned steel tubular heating element, Internal manual reset
thermal cut-out, 6' long cord with molded plug, Temperature control
thermostat with 35°F to 85°F range, 10’ air throw - 262 CFM.
Swivel base can be used as a wall,
floor or ceiling mount |
 |
Loading Dock
Light
Motion Sensor Activated. Energy saving
sensor turns light on instantly when a person or tow motor enters the sensor
field. Safety yellow and black powder coated finish on 1 1/2" square steel
tubing. 500w bulb, 5' Cordset and plug. |
 |
Modular Standard Duty Loading
Dock Lights.
Incandescent • Quartz Halogen • High Pressure Sodium • Metal Halide.
24" / 40" / 60" ARMS WITH MODULAR PLUG RECEPTACLE. Arms constructed of
yellow powder coated, 14 gauge steel tubing. 5' Cordset and plug. |
 |
Portable
Utility Lights.
Incandescent • Quartz Halogen •
Fluorescent • Metal Halide |
 |
Heavy Duty
Portable Utility Lights CART LIGHT STANDS WITH GFCI.
TRIPOD LIGHT STANDS. QUARTZ HALOGEN LIGHT HEADS. METAL HALIDE
LIGHT HEADS. CART LIGHT STANDS WITH GFCI. 10" diameter rubber wheels.
15' all-weather, water and oil resistant SJTW 18/3 cordset and molded NEMA
5-15 plug. Square 12 ga. steel square tubing construction. Height
adjustable from 5' to 11'. |
|
|
Loading Dock Lights - Fully Assembled.
Incandescent • Quartz Halogen • High Pressure Sodium • Metal Halide.
120 Volts. Arms constructed of yellow powder coated, 14 gauge steel
tubing. 5' Cordset and plug. |
 |
PM-18
18" Self Contained Power Mister. SELF CONTAINED MISTING SYSTEM WITH
WATER PUMPED FROM A 10 GALLON COOLER.
18" FAN & PUMP LID FOR EXISTING 10 GALLON IGLOO COOLERS. YOKE MOUNT
MODEL. CART MODEL. HAND CARRY MODEL. |
