|
Unit Heaters
 |
Electromode/Dimplex DGWH4031 Garage/Workshop Heater.
Powerful fan and 4000 watt stainless steel heater element, versatile
mounting bracket, attaches to wall or ceiling - heater swivels to
direct heat, automatic temperature control, helps maintain consistent
temperature from 45-77°F (7-25°C), powder-coated epoxy finish, long
lasting and corrosion resistant. |
 |
Qmark Portable Unit Heater
(240 Volt for workshops, storage buildings and garages)
Perfect for construction job sites, garages, workshops, any unheated area.
Two heat settings: 9102 BTUs (2667 Watts) 13,652 BTUs (4000 Watts).
Three-way bracket lets you stand unit on floor or other flat surface, or
mount to ceiling or to wall. Adjustable thermostat to maintain heating
comfort levels. Comes equipped with 6-foot cord. |
 |
Qmark Type
MUH-35 Unit Heater. 5KW or 3.3KW @ 240V (3.7KW or 2.5KW @ 208V.
Fan-Forced, Metal Sheath - Hard-Wired Heater. Mounts either on the wall or
from the ceiling can be used for primary or spot heating. For factories,
garages, schools, etc. Multiple wattage heat selector switch.
Built-in bi-metal thermostat. Range 40° to 90°F. |
 |
Qmark Type MUH Unit (Blower)
Heaters. Mounts either horizontally or
vertically. For factories, warehouses, garages, stores, shipping rooms,
power stations, aircraft hangers. Can be used for primary, supplementary,
spot, or dual-system heating. Forced air unit heater with 10 power
ratings; from 3KW to 50 KW heating output; 208, 240, 277 and 480V |
 |
Chromalox
Unit (Blower) Heaters
Quiet, reliable fan-forced heating. Vertical, Explosion Resistant,
Corrosion Resistant Heaters. Horizontal Blower
Heater is self-contained, quiet, reliable fan-forced heating, 2.6 - 45 kW,
8,900 - 153,000 Btuh, 208, 240, 277, 480 and 600 Volt, Wall or Ceiling
Mounted |
 |
Qmark Type IUH
Unit Heaters. Primary, supplementary, or
auxiliary heat source in factories, stores, warehouses, public buildings,
service stations, workshops, etc. All motors and contactor coils are 240
volt and operate on the secondary of a factory installed step-down power
transformer on 480 and 600 volt heaters so a separate fan and motor
control power source is not needed. 5 to 30 KW. |
 |
Fostoria
TaskMaster 5100 Heavy Duty Unit Heater.
Suspended Fan-Forced Unit
Heaters ranging in size from 3 to 25KW at 208 to 600 volt. |
 |
Fostoria Type FEP Hazardous
Location Cabinet Unit Heaters. NEMA 4 Hose-Down
Hazardous Location Convection Heaters are for use in: "Class I, Division I
& II, Groups B, C & D." (T2A-UL, CSA, T3A-CSA). Voltages range from
120V to 600V. |
 |
Qmark Type MWUH Unit Heater. 240/208 Volt ceiling mounted.
Applications include primary, supplementary, or auxiliary heat source in
factories, stores, garages, warehouses, public buildings, service
stations, workshops, etc. Ceiling mounting bracket for horizontal or
vertical flow mounting or any position in between. Built-in single
pole thermostat. |
 |
Qmark Type CU Cabinet Unit Heaters.
Surface, full recessed or semi-recessed on the ceiling, floor or wall.
Foyers, Lobbies, Large Rooms, Entryways and Meeting Rooms, Restaurants,
Bowling Alleys, Banks, Retail Stores, Passenger Terminals, Theaters,
Hotels, etc. High / Low Heat Setting. 2Kw to 32Kw; five
cabinet styles - 35", 45", 58", 68" and 78" lengths |
 |
Chromalox
Convection
Wall Mounted Convection Heater self-contained, complete with thermostat, automatic reset.
Each unit is self-contained, complete with thermostat, automatic reset
(standard) and manual reset (optional) cutout. 500 - 5,000 Watts
1,706 - 17,060 Btuh, 120, 208, 240, 277, 480, 575 and 600 Volt, 24, 36 or
48" Widths |
 |
Fostoria Type HLA
Hazardous Location Unit Heaters.
Suspended Fan-Forced Unit Heaters.
3 to 25KW at 208 to 600 volt. They're designed for rugged
industrial applications in hazardous locations where the possibility of
explosion or fire exists due to flammable gases, vapors, powdered metals
or dusts. |
 |
Qmark Type
JUW Washdown corrosion resistant heater.
Heavy-gauge stainless steel case. Comfort heating or freeze protection in
non-hazardous dusty/dirty environments including: waste water treatment
plants, coal handling areas, food processing plants, foundries, steel
mills, cement plants, car washes, swimming pool areas, canneries and
dairies. Internal thermostat, 40ºF -100ºF |
 |
Qmark Type
ICG Explosion proof heater. Explosion
proof junction boxes. Corrosion resistant powder coating. Designed to heat
areas classified as hazardous locations such as petroleum refineries and
gasoline storage and dispensing areas, industrial firms that use flammable
liquids in dip tanks for parts cleaning, petrochemical companies
manufacturing chemicals, dry cleaning plants, utility and natural gas
plants, aircraft hangars, fueling areas, and many other hazardous areas
covered by these classifications. |
 |
Qmark Type
GUX Explosion proof unit heater low operating
temperatures. Designed to heat areas classified as hazardous
locations. Typical applications involve oil refineries, sewage treatment
plants, petrochemical plants, oil rigs, unattended pumping stations,
chemical storage and handling facilities, paint storage areas, and
countless other hazardous areas. |
|
|
Qmark®
is a registered trademark of Marley
Engineered Products.
Chromalox® is a registered trademark.
|
