|
Fan-Forced Electric Wall Heaters
These heaters are ideal for times and locations
when you need to maintain an extra amount of heat in a room, such as bathrooms
or an entryway, or can be used for primary heating.
 |
Electromode/Dimplex EF621C Deluxe Wall Mounted Fan Forced Heater (Non-Recessed).
Premium residential wall heater with built-in thermostat, with a 60 minute
timer, quiet performance, easy-mount wall bracket, frost protection
settings (at 41°f unit will automatically turn on. Kitchens,
bathrooms, hallways, and foyers. |
 |
Qmark Type CWH 3000
Commercial Fan-Forced Wall Heater. For
supplementary heating of offices, reception rooms, game rooms, family
rooms and similar light-duty commercial and residential applications.
1500, 2000, 3000, 4000 and 4800 watts; 208, 240, 277 volts. Integral
thermostat. |
 |
Qmark Type CRA Wall Heaters
Wall Mount Fan Forced Zonal Heaters. Complete unit: Heater assembly, grille, back box and factory installed DP thermostat.
Suitable for use in almost any room. 500 - 1000 Watt units are approved
for ceiling mounting. |
 |
Qmark Type CWH
1000 Commercial Fan-Forced
Wall Heater. Heating element is heavy duty
steel fins brazed to steel sheathed tubular elements in a grid pattern
that covers the entire discharge area. Airflow system maximizes air
volume at minimum noise level; 65 CFM |
 |
Qmark Type AWH Architectural
Heavy-Duty Fan-Forced Wall Heater. For
supplementary heating of offices, reception rooms, game rooms, family
rooms, and similar light-duty commercial and residential applications.
1500, 2000, 3000, 4000, and 4800 watts; 208, 240, 277 volts; 60 hz.
Integral thermostat. |
|
Qmark Type EFQ
Commercial Fan-Forced Wall Heater. Ideal for
offices, stores, schools, churches, hospitals, dormitories, airport
terminals, reception rooms, entrance lobbies, corridors and stairwells.
Unit installs easily in either new or remodeled buildings. Operates
at 6,000 or 8,000 watts at 208V, 240V, 277V, 347V, 480V or 600V, 1Ø, 60
Hz. Integral thermostat. |
 |
Qmark Type 1235
120 and 240/ 208 Volt Wall Heaters. Use as an add-on
heat source or as a primary heat supply. Recess mounted installation;
horizontal or vertical mounting. Front mounted thermostat for convenient
room comfort control |
 |
Qmark Type QFG 120,
208 and 240 Volt Wall Heaters. Suitable for use in
almost any room. Use single heaters in smaller rooms such as bedrooms and
bathrooms. Use multiple heaters (controlled by a single thermostat) in
larger rooms such as living rooms and family rooms. |
|
|
Qmark Type
GFR 120 and 240/208 Volt Wall Heaters.
Ideal for bedrooms, dens, basements, converted attics, breezeways,
garages, bathrooms, small offices, workshops, and other similar areas.
Also adaptable to multiple installations in somewhat larger or odd shaped
rooms. Wattage range from 375 watts (1280 Btu/hr) to 2400 watts (8190
Btu/hr) |
 |
Qmark Type B2451
120 and 240/ 208 Volt Wall Heaters. Coiled
nichrome element for fast heat delivery. Snap-action thermostat for
precise room comfort control. Recess mounted installation Almond Finish.
Rough-in opening 11 1/8" x 14 3/8" |
 |
Qmark Type LFK
Commercial Wall Heaters.
For supplementary heating of offices, reception rooms, game rooms,
family rooms and similar light-duty commercial and residential
applications. 2000, 3000, 4000 and 4800 watts at 240 volts; 60 hz. Steel
finned metal sheath electric heating elements with low sheath
temperatures provide uniform heat and long service life. Recess or
surface mount in standard 2" x 4" stud walls |
|
|
Qmark® is a
registered trademark of Marley Engineered
Products.
Electromode and Dimplex are registered trademarks of
Dimplex North America Ltd.
|
