Wall Mounted Heaters

Convection and Conduction
	Portable Baseboard 120 Volt with 6' plug and cord set. Standard or Hydronic.	Standard 2500 Series Residential Baseboards For new construction or remodel applications. For single family homes, apartments, modular or mobile homes as primary, secondary or supplemental heat.
	Type HBB Type HBB Hydronic Baseboard. Navajo White Enamel Finish. Low unit surface temperatures.	Qmark Type WHT500 Utility Well/Pump House Heater. Install it anywhere heat is needed to prevent pipes, pumps, and other water, hydraulic fluid or oil-filled equipment from freezing. Set the thermostat at any desired level and leave it.
	Type QMKC Commercial Baseboard. 18 Gauge Front Cover. For high-traffic areas such as restaurants, offices, schools, institutions, etc.	Type CBD Heavy Duty Commercial Baseboard Heaters. This heavy-duty baseboard is designed specifically for commercial use. The front cover is made of 16 gauge cold rolled steel.
	Markel 3900 Hydronic Baseboard Heaters. Permanent mount, liquid filled elements, Residential models in “White” powder coat finish, Commercial models available in “Bankers Bronze”, Extruded 12 gauge aluminum housing	Fostoria Type FEP Hazardous Location Cabinet Unit Heaters. NEMA 4 Hose-Down Hazardous Location Convection Heaters are for use in: "Class I, Division I & II, Groups B, C & D." (T2A-UL, CSA, T3A-CSA). Voltages range from 120V to 600V.
	E.F.M. Elect-T-Therm Electric Boiler for Forced Hot Water Systems	Eemax Electric Tankless Instantaneous Water Heaters. To serve sinks in public hand washing areas, modular buildings and offices, strip malls, service stations and concession stands, kitchens, bars, utility sinks. Manufacturing processes, high flow boosters. Large circular industrial washdown stations. Balanced loading for high power water heaters. Residential showers, whole bathrooms smaller houses, condos, summer cabins and apartments. Industrial boosters, higher flow rate applications such as wash down stations. Higher flow rate accurate temperature control for photo labs.
	Chromalox Convection Wall Mounted Convection Heater self-contained, complete with thermostat, automatic reset. Each unit is self-contained, complete with thermostat, automatic reset (standard) and manual reset (optional) cutout. 500 - 5,000 Watts 1,706 - 17,060 Btuh, 120, 208, 240, 277, 480, 575 and 600 Volt, 24, 36 or 48" Widths
Forced Air Heaters
	Electromode/Dimplex DGWH4031 Garage/Workshop Heater. Powerful fan and 4000 watt stainless steel heater element, versatile mounting bracket, attaches to wall or ceiling - heater swivels to direct heat, automatic temperature control, helps maintain consistent temperature from 45-77°F (7-25°C), powder-coated epoxy finish, long lasting and corrosion resistant.	Qmark Portable Unit Heater (240 Volt for workshops, storage buildings and garages) Perfect for construction job sites, garages, workshops, any unheated area. Two heat settings: 9102 BTUs (2667 Watts) 13,652 BTUs (4000 Watts). Three-way bracket lets you stand unit on floor or other flat surface, or mount to ceiling or to wall. Adjustable thermostat to maintain heating comfort levels. Comes equipped with 6-foot cord.
	Qmark Type MUH Unit (Blower) Heaters. Mounts either horizontally or vertically. For factories, warehouses, garages, stores, shipping rooms, power stations, aircraft hangers. Can be used for primary, supplementary, spot, or dual-system heating. Forced air unit heater with 10 power ratings; from 3KW to 50 KW heating output; 208, 240, 277 and 480V	Type CRA Wall Heaters Wall Mount Fan Forced Zonal Heaters. Complete unit: Heater assembly, grille, back box and factory installed DP thermostat. Suitable for use in almost any room. 500 - 1000 Watt units are approved for ceiling mounting.
	Type AWH Architectural Heavy-Duty Fan-Forced Wall Heater. For supplementary heating of offices, reception rooms, game rooms, family rooms, and similar light-duty commercial and residential applications. 1500, 2000, 3000, 4000, and 4800 watts; 208, 240, 277 volts; 60 hz. Integral thermostat.	Qmark Type QTS Toe Space Fan-Forced Heater. A toe-space heater will fit where no other heater will. It can be recessed into toe space areas under kitchen or utility room cabinets or into the soffit area above them. It is convenient for checkout counters, ticket or tollbooths and many other places where no other heater seems to fit.
	Electromode/Dimplex EF621C Deluxe Wall Mounted Fan Forced Heater (Non-Recessed). Premium residential wall heater with built-in thermostat, with a 60 minute timer, quiet performance, easy-mount wall bracket, frost protection settings (at 41°f unit will automatically turn on. Kitchens, bathrooms, hallways, and foyers.	Type CWH 1000 Commercial Fan-Forced Wall Heater. Heating element is heavy duty steel fins brazed to steel sheathed tubular elements in a grid pattern that covers the entire discharge area. Airflow system maximizes air volume at minimum noise level; 65 CFM
	Qmark Type CU Cabinet Unit Heaters. Surface, full recessed or semi-recessed on the ceiling, floor or wall. Foyers, Lobbies, Large Rooms, Entryways and Meeting Rooms, Restaurants, Bowling Alleys, Banks, Retail Stores, Passenger Terminals, Theaters, Hotels, etc. High / Low Heat Setting. 2Kw to 32Kw; five cabinet styles - 35", 45", 58", 68" and 78" lengths	Type CWH 3000 Commercial Fan-Forced Wall Heater. For supplementary heating of offices, reception rooms, game rooms, family rooms and similar light-duty commercial and residential applications. 1500, 2000, 3000, 4000 and 4800 watts; 208, 240, 277 volts. Integral thermostat.
	Fostoria Type HLA Hazardous Location Unit Heaters. Suspended Fan-Forced Unit Heaters. 3 to 25KW at 208 to 600 volt. They're designed for rugged industrial applications in hazardous locations where the possibility of explosion or fire exists due to flammable gases, vapors, powdered metals or dusts.	Type EFQ Commercial Fan-Forced Wall Heater. Ideal for offices, stores, schools, churches, hospitals, dormitories, airport terminals, reception rooms, entrance lobbies, corridors and stairwells. Unit installs easily in either new or remodeled buildings. Operates at 6,000 or 8,000 watts at 208V, 240V, 277V, 347V, 480V or 600V, 1Ø, 60 Hz. Integral thermostat.
	Excel Dryer Hand Dryers Warm air hand dryers can be less than 10% of the cost of paper towels. 110/120, 208. 220/240 or 277 Volts.	Qmark Type MUH-35 Unit Heater. 5KW or 3.3KW @ 240V (3.7KW or 2.5KW @ 208V. Fan-Forced, Metal Sheath - Hard-Wired Heater. Mounts either on the wall or from the ceiling can be used for primary or spot heating. For factories, garages, schools, etc. Multiple wattage heat selector switch. Built-in bi-metal thermostat. Range 40° to 90°F.
	Chromalox Unit (Blower) Heaters Quiet, reliable fan-forced heating. Vertical, Explosion Resistant, Corrosion Resistant Heaters. Horizontal Blower Heater is self-contained, quiet, reliable fan-forced heating, 2.6 - 45 kW, 8,900 - 153,000 Btuh, 208, 240, 277, 480 and 600 Volt, Wall or Ceiling Mounted	Qmark Type LFK Commercial Wall Heaters. For supplementary heating of offices, reception rooms, game rooms, family rooms and similar light-duty commercial and residential applications. 2000, 3000, 4000 and 4800 watts at 240 volts; 60 hz. Steel finned metal sheath electric heating elements with low sheath temperatures provide uniform heat and long service life. Recess or surface mount in standard 2" x 4" stud walls